PDA

View Full Version : Hp IQ770 TouchSmart Front Bezel



BNBSFSD
09-22-2009, 07:53 AM
February 25, 2009 10:54 PM

I gaave it a good shot, but I was beaten.
I took out every screw possible but could not get the mother (board) out.
There seems to be some trick to popping the front cover off. where the DVD buttons and ard reader are. Actually that part moved, it was the part by the front USB reader that was hung up. I am sure there are at least 2 final screws up there tthat would at leaset allow the MB to be lifted enough to get the tuner card out. It is frustrating, as they seem to have built the computer around the tuner card. and there is no reason the back pannel could not just screw off for access to the tuner.

If the back panel of tin wwould comee off it would be easy. but this seems to be spot welded on, I considered cutting it, but did not want to get metal filings all inside the box. Cutting with shears would mangle it and since my wife paid for it and claims it as hers, I dare not alter the cosmttics even if they are in te back and not seen

If anyone knows the secret handshake to get this appart I would appretiate it.

I know I could use a USB tuner, but I was trying to maintain the "all in one" look. RE: wife and cosmetics.

BNBSFSD
09-22-2009, 08:21 AM
On the right side there is a bezel that shows the usb and other symbols Peel back the sticker and under the sticker there are two screws.. unscrews that and You good to go, I hope that helped.

schico
09-28-2009, 01:33 PM
Are these screws on the right side front?
You mentioned you may have pictures. That may help.

Once the bezel is off I assume I will still need to get everything (motherboard, etc) out to access the tuner card, is that correct?


Thanks for the info.

BNBSFSD
09-28-2009, 05:00 PM
the screws are on the right side, in front there a cover door for the usb plugs and etc, under that sticker there are two screws you would have to remove those screws and the bezel will come off, so again, on the right side, there a flip down door, under the stickers just pull that off and remove the two screws.

Good Luck If You need help let me know thanks